View HD74HC590_906915.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC590
8-bit Binary Counter/Register (with 3-state outputs)
Description
This device each contains an 8-bit binary counter that feeds an 8-bit storage register. The storage register has parallel outputs. Separate clocks are provided for both the binary counter and storage register. The binary counter features a direct clear input CCLR and a count enable input C CKEN. For cascading a ripple carry output R CO is provided. Expansion is easily accomplished by tying R CO of the first stage to CCKEN of the second stage, etc. Both the counter and register clocks are positive-edge triggered. If the user wishes to connect both clocks together, the counter state will always be one count ahead of the register, Internal circuitry prevents clocking from the clock enable.
Features
* * * * * High Speed Operation: tpd (RCK to Q) = 18.5 ns typ (CL = 50 pF) High Output Current: Fanout of 15 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C)
HD74HC590
Function Table
Inputs G H L X X X X X X X X X X RCK X X CCLR X X X X L H H H CCKEN X X X X X L L H X CCK X X X X X Function Q output disabled Q output enabled Contents of counter stored to register No change in register Counter clear Count up No count No count
RCO = QA'*QB'*QC'*QD'*QE'*QF'*QG'*QH'* (CCKEN) (QA' to QH': Output of Internal Counter)
Pin Arrangement
QB 1 QC 2 QD 3 QE 4 QF 5 QG 6 QH 7 GND 8 (Top view)
16 VCC 15 QA 14 C 13 RCK 12 CCKEN 11 CCK 10 CCLR 9 RCO
2
HD74HC590
Absolute Maximum Ratings
Item Supply voltage range Input voltage Output voltage Output current DC current drain per VCC, GND DC input diode current DC output diode current Power Dissipation per package Storage temperature Symbol VCC VIN VOUT I OUT I CC, I GND I IK I OK PT Tstg Rating -0.5 to +7.0 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 35 75 20 20 500 -65 to +150 Unit V V V mA mA mA mA mW C
3
HD74HC590
Logic Diagram
T Q CCK CCLR CCK T Q CCK CCLR CCK T
REC Out RCK RCK G REC Out RCK RCK G
QA
QB
Q CCK CCLR CCK T Q CCK CCLR CCK T
REC Out RCK RCK G
QC
REC Out RCK RCK G
QD
Q CCK CCLR CCK T Q CCK CCLR CCK T
REC Out RCK RCK G
QE
REC Out RCK RCK G
QF
Q CCK CCLR CCK T Q CCK CCLR CCK
REC Out RCK RCK G
QG
REC Out RCK RCK G
QH
CCKEN CCK CCLR RCK G
RCO
4
HD74HC590
DC Characteristics
Ta = 25C Item Input voltage Symbol VIH Ta = -40 to +85C Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 5.0 1.0 40 A A A I OL = 4 mA I OL = 5.2 mA Vin = VIH or VIL, Vout = VCC or GND Vin = VCC or GND Vin = VCC or GND, Iout = 0 A V RCO Vin = VIH or VIL I OH = -4 mA I OH = -5.2 mA I OL = 20 A V RCO Vin = VIH or VIL I OL = 6 mA I OL = 7.8 mA I OH = -20 A V QA to QH Vin = VIH or VIL I OH = -6 mA I OH = -7.8 mA I OL = 20 A V QA to QH Vin = VIH or VIL I OH = -20 A V Unit V Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 -- 3.15 -- 4.2 -- -- -- -- -- -- -- -- -- -- 0.5 1.5 3.15 4.2 --
VIL
2.0 4.5 6.0
1.35 -- 1.8 -- 1.9 4.4 5.9 4.13 5.63 -- -- --
Output voltage
VOH
2.0 4.5 6.0 4.5 6.0
1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- 5.68 -- -- -- -- -- -- -- --
VOL
2.0 4.5 6.0 4.5 6.0
0.0 0.1 0.0 0.1 0.0 0.1 -- --
0.26 -- 0.26 -- 1.9 4.4 5.9 4.13 5.63 -- -- --
Output voltage
VOH
2.0 4.5 6.0 4.5 6.0
1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- 5.68 -- -- -- -- -- -- -- -- -- -- --
VOL
2.0 4.5 6.0 4.5 6.0
0.0 0.1 0.0 0.1 0.0 0.1 -- -- -- -- --
0.26 -- 0.26 -- 0.5 -- 0.1 -- 4.0 --
Off-state output current Input current Quiescent supply current
I OZ Iin I CC
6.0 6.0 6.0
5
HD74HC590
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Maximum clock frequency Symbol f max Ta = -40 to +85C Max 4 20 24 250 50 43 315 63 54 250 50 43 190 39 33 190 38 33 -- -- -- -- -- -- -- -- -- -- -- -- ns CCK to RCK ns CCKEN to CCK ns CCLR to CCK ns ns ns ns RCK to Q ns CCLR to RCO ns CCK to RCO Unit MHz Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 80 16 14 5 5 5 -- -- -- -- 18 -- -- 17 -- -- 18 -- -- 16 -- -- 17 -- -- 6 -- -- -- -- 5 25 29 -- -- --
Propagation delay t PLH time t PHL
2.0 4.5 6.0
200 -- 40 34 -- --
t PLH
2.0 4.5 6.0
250 -- 50 43 -- --
t PLH t PHL
2.0 4.5 6.0
200 -- 40 34 -- --
Output enable time
t ZL t ZH
2.0 4.5 6.0
150 -- 30 26 -- --
Output disable time
t LZ t HZ
2.0 4.5 6.0
150 -- 30 26 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 100 20 17 5 5 5 125 25 21 250 50 43
Pulse width
tw
2.0 4.5 6.0
Removal time
t rem
2.0 4.5 6.0
Setup time
t su
2.0 4.5 6.0 2.0 4.5 6.0
100 -- 20 17 -3 --
200 -- 40 34 10 --
6
HD74HC590
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns) (cont)
Ta = 25C Item Hold time Symbol th Ta = -40 to +85C Max -- -- -- 75 15 13 95 19 16 10 pF ns RCO ns Q Unit ns Test Conditions CCKEN to CCK CCK to RCK
VCC (V) Min Typ Max Min 2.0 4.5 6.0 5 5 5 -- -- -- -- -- -- -- -- -- -- -- 4 -- -- 5 -- 5 -- -- -- 60 12 10 75 15 13 10 5 5 5 -- -- -- -- -- -- --
Output rise/fall time
t TLH t THL
2.0 4.5 6.0
t TLH t THL
2.0 4.5 6.0
Input capacitance
Cin
--
7
19.20 20.00 Max 16 9 7.40 Max 6.30
Unit: mm
1 1.3
1.11 Max
8
0.51 Min
2.54 Min 5.06 Max
7.62
2.54 0.25
0.48 0.10
0.25 - 0.05 0 - 15
Hitachi Code JEDEC EIAJ Weight (reference value)
+ 0.13
DP-16 Conforms Conforms 1.07 g
Unit: mm
10.06 10.5 Max 16 9
5.5
1
*0.22 0.05 0.20 0.04
8 0.80 Max
2.20 Max
0.20 7.80 + 0.30 -
1.15 0 - 8 0.70 0.20
1.27 *0.42 0.08 0.40 0.06
0.12 M
Hitachi Code JEDEC EIAJ Weight (reference value) FP-16DA -- Conforms 0.24 g
*Dimension including the plating thickness Base material dimension
0.10 0.10
0.15
Unit: mm
9.9 10.3 Max 16 9 3.95 1 1.27 0.635 Max 8
0.11 0.14 + 0.04 - 1.75 Max
*0.22 0.03 0.20 0.03
0.10 6.10 + 0.30 -
1.08 0 - 8
0.67 0.60 + 0.20 -
*0.42 0.08 0.40 0.06
0.15 0.25 M
*Dimension including the plating thickness Base material dimension
Hitachi Code JEDEC EIAJ Weight (reference value)
FP-16DN Conforms Conforms 0.15 g
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

▲Up To Search▲

Price & Availability of HD74HC590

	To Download HD74HC590 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .